What are the fundamental safety precautions for using a magnetic drilling machine?

1. Do not use the machine in flammable or potentially explosive environments.
2. Persons who due to their physical, mental or motor response abilities are unable to operate the machine safely may only use the machine under supervision or instruction by a responsible person.
3. Persons with heart pacemakers or other medical implants must not use this machine.
4. Children must not be allowed to use the machine.
5. Inspect the machine for visible signs of damage before use. Do not use a visibly damaged machine.
6. Before beginning work, check the condition of the safety chain and the function of the switches on the machine.
7. Repairs to the mains cable may only be carried out by a qualified electrician.
8. Repairs to the machine may only be carried out by an authorised workshop or by the works after-sales service. Unqualified repairs can lead to considerable danger for the user.
9. Repairs to the machine during the warranty period may only be carried out by a service centre authorised by the manufacturer, as otherwise the warranty will be voided.
10. Defective parts may only be replaced with original spare parts. Only these parts guarantee that the safety requirements are satisfied.
11. Do not leave the machine unsupervised during operation.
12. Store the machine in a dry, temperate location out of the reach of children.
13. Do not leave the machine standing outdoors and do not expose it to moisture.
14. Make sure that your work area is sufficiently lit (>300 Lux).
15. Do not use low power machines for heavy working.
16. Make sure that your workplace is clean.
17. Keep the machine clean, dry and free of oil and grease.

Which safety precautions should be observed to avoid injuring yourself and/or others?

1. Operate the machine only with the protective equipment stipulated in these operating instructions (see section Personal protective equipment).
2. Do not wear protective gloves when the machine is running. A glove can be caught by the drilling machine and torn off the hand. Risk of losing one or more fingers.
3. Remove loose jewellery before beginning work. Wear a hair net if you have long hair.
4. Always switch off the machine before changing tools, performing maintenance or cleaning. Wait until the machine has come to a complete standstill.
5. Always remove the plug from the mains socket before changing tools, cleaning or performing maintenance, in order to avoid unintentional starting of the machine.
6. Do not put your hand into the machine while it is in operation. Remove shavings only when the machine is at a standstill. Wear protective gloves when removing swarf.
7. When working on scaffolding, the operator must be secured with a safety belt as the machine can oscillate dangerously in the event of interruption to the power supply.
8. Check for secure clamping of the electromagnets on the substrate before every use (see section Preparing).
9. Secure the machine with the safety chain supplied when working from an inclined or vertical position or during overheadwork. The machine could fall down if the magnet is loosened or the power fails.
10. Check that the tool is tightened securely before using (see section Inserting the tool). Do not allow the connecting cable to hang over edges (danger of tripping).